|Tiella Lighting 800CBL5PN Cable Kit 5 Head Pivot Matte Nickel - Includes five highly adjustable Accent heads (20 watts max. each) that tilt between the cables and rotate 120dg within their rings and five 12 volt, 20 watt MR16 lamps. 120 volt in/12 volt out 100 watt electronic surface transformer mounts to a standard 4inch square junction box with round plaster ring (provided by electrician), and includes 12inch soft wire feeds. Includes Two 20FT sections of Cable enough for a twenty foot wall-to-wall run. Turnbuckles and anchors can be mounted to the walls or ceiling. When ceiling mounting kit, cables will drop 2inch below ceiling. The kit may be dimmed with a standard incandescent dimmer. Matte Nickel finish only.|
Answer: The transformer can be mounted anywhere on the ceiling as long as the lead wires
from it can reach the system cables. 800CBL5PN includes 12inch soft wire feeds.
Answer: The 800CBL5PN cable system includes (2) TURNBUCKLES and (2) MOUNTING POSTS. You can see them in the picture on this page and in the instruction sheet. See link to it above. The system can be mounted to wall or ceiling.
Answer: It can be mounted anywhere on the cable run, it does not need to be centered
Answer: There are lose cables that are not tightened enough. Go back and check all wire connections.
Answer: The transformer can be mounted anywhere on the wall or ceiling as long as the lead wires
Answer: Look at the Installation guide (button with link on right. The lead wires are up to 12" so you
Answer: It is set to be hard wired. Your electrician may be able to add a plug outlet to the cable, but it does ship for hard-wired use.
Answer: The cable kit (along with all other track and cable kits available) are not customizable. To obtain this result, a cable system with individual components would need to be composed instead of the kit.
See more information in the Product Detail tab
Customers also viewed