Loading... Please wait...

  • Hadco Lighting RSC2-P Line Voltage Aluminum Step Light with Insulation Detector
  • White Finish - Hadco Lighting RSC2-P Line Voltage Aluminum Steplyte
  • Bronze Finish - Hadco Lighting RSC2-P Line Voltage Aluminum Steplyte
Image may not necessarily reflect actual finish. Please refer to the product description

Hadco Lighting RSC2 120V Aluminum Step Light with Protector



Free Shipping for Order over $50Price Change
List Price:
Usually Ships Out In 5 Weeks

Housing Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications. Die-cast aluminum trim ring contains less than 0.3% copper to resist corrosion. Cast bronze fixture has polycarbonate, color impregnated, dark bronze finish. Cast bronze louver is natural cast bronze with frosted tempered glass. Die-cast copper-free aluminum with 45° cutoff, with frosted tempered glass. Gasketing is silicone. Fasteners are 300 series stainless steel. Note- Recessed housing contains four (4) ½" NPS conduit inlets (two (2) on bottom and one on each side) and internal pull-through wiring compartment.
Finish Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Zinc-rich primer and thermoset powdercoat for durability.  
Lamping 9W PLS Fluorescent (G23). 13W PLC Fluorescent (120V- GX23-2; 277V- G24Q-1). 18W CFL8W maximum S-8 (1141) lamps (Single contact bayonet base). 40W maximum T10 (4KV porcelain mini-can base). Lower wattage lamps are acceptable.
Optical Assembly Symmetric reflector is precision formed, steel with a white reflective coating. The cast louver offers lower light levels with cut-off for lighting stairways or general lighting where shielding of the light source is more important than high light levels.  
Electrical Assembly Fixture is pre-wired with 18 AWG black, white, and ground wires. 1141 lamps use an integral 120V/12V transformer.
Warranty Three-year limited warranty.  
Certifications ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001-2008 Standards. ADA Compliant when used in indoor and outdoor wall applications.
Width 9" (229mm)  
Maximum Weight 3.64 lb.
Depth 3 1/2" (90mm)  
Height 3 1/2" (90mm)
Ballast The ballast for 18W CF shall be electronic 50 or 60Hz. The ballast for 9 and 13W CF shall be class B core and coil HPF rated for 0 degree starting temperature. 13W Fluorescent 120V- Core and coil, NPF, 0°C minimum start. 13W 277V- Electronic, 0°C minimum start. 9W Fluorescent ballast is core and coil, NPF, 0°C minimum start.
Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Sign Up To Our Newsletter

'Louie Lighting; Expert Affordable Lighting Solutions & Custom Lighting Services'
Louie Lighting, Inc. BBB Business Review