| Please select all options above for the item. Please copy the final item number given once |
options have been selected. Please include the item number when submitting a quote request
Inground Lighting fixtures offer a versatile way of up Lighting trees, walls, and outdoor features. This line voltage Inground fixture with integrated ballast utilizes R40, PAR20, PAR30, or PAR38 Metal Halide series of lamps and is rated for use with lamps up to 70 watts. The compression-molded, fiber-reinforced composite housing is designed to withstand the most rugged of applications. The injection-molded, glass-reinforced Ryton R4 composite trim ring is fitted to the housing with a C-curved cross-section gasket to ensure a superior weather-tight seal. A clear, tempered, shock and heat resistant soda-lime glass lens safeguards the lamp and optics. An adjustable lamp bracket provides up to ±25º of tilt as well as 360º of rotation for precise beam control. In addition, the 1107 has an International Protection rating of IP67, for protection against detrimental dust intrusion as well as penetration of water under submersion and a drive-over rating of 3,000 lbs., allowing for drive-over strength in excess of normal vehicle weight requirements. There are 15 super durable polyester powder-coated finishes to choose from and several different optical accessories available. Stainless steel trim ring is also available. Lamp not included with fixture.
Accessory lenses are available, Please contact customer service for information and pricing.
|Lamp Type||R40, PAR20, PAR30, PAR38 - Metal Halide - 70W Max. Ballast is integrated into fixture. Please specify ballast type in fixture ordering information. Lamp not included with fixture, order separately.|
|Housing||Compression-molded, glass-reinforced polymer for strength and high UV stability warranted for ten years against corrosion.|
|Socket/Lamp Holder||Top grade porcelain, medium base 4KV pulse rated socket with spring center contact and a silicone rubber jacket protector to prevent moisture/debris from entering socket.|
|Ballast||High-power factor ballast rated for -20 DegreeF starting, 120 volt standard.|
|Lens||Clear, tempered, shock and heat resistant, soda-lime glass lens - crowned (convex) to promote water runoff.|
|Optics/Aiming||Adjustable lamp bracket provides up to ±25 Degree of tilt as well as 360 Degree of rotation for precise beam control. Lamp bracket can be locked into place to prevent disrupting lamp position when relamping.|
|Mounting||In-grade. Wire compartment has two 3/4'' NPT conduit entries for through wiring as well as a silicone rubber gasketed cover for a completely waterproof wiring compartment (Optional pre-tapped side conduit entries are available consult factory for details). Potting compound for wiring compartment supplied with fixture. Housing design allows for direct concrete mounting with no concrete mounting kit required.|
|Fasteners/Inserts||All fasteners are stainless steel and brass.|
|Wiring||Prewired with 200 DegreeC-rated wire along with a grounded lead.|
|Certification||UL Listed to U.S. and Canadian safety standards for line voltage landscape luminaires (UL 1598). Maximum wattages allowed by Underwriters Laboratories (UL) for U.S. and Canadian markets may vary. Maximum wattages specifed are Underwriters Laboratories U.S. standard. This luminaire has an ingress protection rating of IP67 for protection against detrimental dust intrusion as well as penetration of water under submersion. Drive-over rated for 3,000 lb.|
Customers also viewed