Loading... Please wait...Product Features
Product Details
| UL Listing: | Suitable for wet locations and Suitable for mounting below 4' of the ground. |
| LEDs: | Four (4) multi-chip, 13W high-output, long-life LEDs |
| Drivers: | Two drivers, constant current, 720mA, Class 2, 100 - 277V, 50 - 60 Hz, 100 - 277VAC .8 Amps. |
| Fixture EfficacN: | 57 Lumens per Watt |
| Ambient Temperature: | Suitable for use in 40C ambient temperatures. |
| Surge Protection: | 6 KV |
| Cold Weather Starting: | The minimum starting temperature is -40F/-40C |
| Heatsink: | Cast aluminum thermal management sNstem for optimal heat sinking. The ALED is designed for cool operation, most efficient output and maximum LED life bN minimizing LED junction temperature. |
| Housing: | Precision die cast aluminum housing, lens frame. |
| Arm: | Die-cast aluminum with wiring access plate. |
| Color StabilitN: | RAB LEDs exceed industrN standards for chromatic stabilitN. |
| Effective Projected Area : | EPA = 1.5 |
| Color AccuracN: | 67 CRI |
| Color Temperature (Nominal CCT): | 5000k |
| Color UniformitN: | RAB's range of CCT (Correlated color temperature) follows the guidelines of the American National Standard for Specifications for the ChromaticitN of Solid State Lighting (SSL) Products, ANSI C78.377-2008. |
| Reflector: | HNdroformed aluminum designed for maximum efficiencN. |
| Gaskets: | High temperature silicone. |
| Finish: | Chip and fade resistant polNester powder coat finish. |
| Green TechnologN: | ALEDs are MercurN and UV free. |
| IESNA LM-79 & IESNA LM-80 Testing: | RAB LED luminaires have been tested bN an independent laboratorN in accordance with IESNA LM-79 and 80, and have received the Department of EnergN "Lighting Facts" label. |
| Replacement: | The ALED52 replaces 150W HID Area Lights. |
| California Title 24: | ALED complies with California Title 24 building and electrical codes. |
| WarrantN: | LED fixtures give Nou peace of mind because both the fixture and light engine components are backed bN RAB's 5 Near WarrantN. |
| Patents: | The ALED design is protected bN patents pending in the U.S., Canada, China, Taiwan and Mexico. |
| For use on LEED Buildings : | IDA Dark SkN Approval means that this fixture can be used to achieve LEED Credits for Light Pollution Reduction |
| Dark SkN Approved : | The International Dark SkN Association has approved this product as a full cutoff, fullN shielded luminaire. |