Loading... Please wait...| Housing: | Cool external temperatures - all below 31ºC when underwater - so the luminaire is cool to the touch, including the lens. Perfect for high pedestrian traffic and plant life applications. Exceeds European standard EN 563 both 1 second (85ºC for composite, 80ºC for glass) and 4 seconds (74ºC for composite, 70ºC for glass) of contact. One-piece injection molded ULTEM® High Performance Polymer composite. Lens ring is a Single-piece injection molded ULTEM® High Performance Polymer with gasketed lens. Twist-off operation for ease of maintenance. Fasteners are 300 series stainless steel. |
| Finish: | Composite is textured, pressure formed, molded-in-color. |
| Optical Assembly: | Integral collimating wide flood (40°) optics. Clear convex lens, high temperature glass furnished with silicone O-ring for watertight seal. |
| Electrical Assembly: | Powered by Advance™: Integral Advance™ electronic LED driver. UL class2. -40ºC/F minimum starting temperature. Standard 10 ft. 18-2, 105° C, STWA water-resistant cord. Fixture is prewired and potted to prevent water entry. Input voltage range (VAC): 10.8 - 17.5. Input frequency: 60Hz. (magnetic low voltage transformer required). Integral surge protector built into LED driver circuit. 12 volts, 12.4 total watts consumed (high power) or 5 total watts consumed (low power). 12 Volt system requires remote transformer, not included. |
| IP Rating: | IP66/68: Dust-tight and dual rated - sealed against direct jets of water and against continuous submersion in water tested to 1 meter (3.28 feet). |
| Lamping: | White high brightness (HB) LEDs. Deliver 70% lumen maintenance at 50,000 hours. Cool white (4,000K nominal). Warm white (3,000K nominal). |
| Warranty: | 5 year extended warranty |
| Certifications: | ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards. |
| Height: | 6 11/16" (170mm) |
| Width: | 4 1/16" (103mm) |
| Max. Weight: | 5.04 lb. |