Due to current Philips Lighting consolidation of their lighting lines including Hadco, orders may be delayed in shipping. We will try to have your order fulfilled and shipped as quickly as possible.
The SRL4 Low Voltage Decklyte from Hadco Lighting is a low voltage outdoor deck light housed in die cast aluminium in black and bronze finishes. The finish is obtained through an electrostatically applied thermoset polyester powder coat, which makes the coating durable and weather resistant. The SRL4 Decklyte is capable of harnessing the superior qualities of xenon bulbs and can support a xenon bulb of up to 10 watts, which is equivalent to about 40 watts of conventional lighting power. The deck light is extremely light in weight (about 0.30 lbs.) and is capable of operating in wet conditions. Hadco Lighting takes care to see that all the components of the SRL4 deck light are manufactured in-house, thereby conforming to its international quality standards.
|Housing:||Die-cast aluminum. Fasteners are 300 series stainless steel.|
|Finish:||Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications.|
|Lamping:||12W maximum wedge base T3-¼ lamp. 10W wedge base T3 ¼ (xenon) lamp is included with fixture. Lower wattage lamps are acceptable. Xenon lamp life is approximately 10,000 hours. Lamp does not need to be protected and can be directly handled.|
|Electrical Assembly:||Wedge base socket type (T3-¼ or T5). 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.|
|Installation & Mounting||Two (2) Stainless #8 wood screws (supplied) via key slots.|
|Warranty:||Three-year limited warranty.|
|Certifications:||ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.|
|Height:||2 3/8" (60mm)|
|Width:||3 1/2" (89mm)|
|Max. Weight:||0.30 lb|