Categories

 Loading... Please wait...
=
  • My Account
  • Wish Lists
  • Sign in or Create an account
  • Hadco Lighting PA31 Roadway Large Profiler
  • Hadco Lighting PA31 Roadway Large Profiler
  • Hadco Lighting PA31 Roadway Large Profiler
  • Hadco Lighting PA31 Roadway Large Profiler
  • Hadco Lighting PA31 Roadway Large Profiler

Hadco Lighting PA31 Roadway Large Profiler

Product Item#
PA31
List Price:
Price:
Request Quote Below
Availability:
Please contact Customer Service for Availability

Product Price May Change Based On Options Selected

Product Description

 

Please view available options in the ordering guide below. 
Please have your options selected when contacting Customer Service for a quote request

click-for-quote.png 

The Profiler design combines architectural style with efficient lighting performance. This luminaire produces no uplight and offers rotatable optics, providing lighting to meet today challenging demands for Dark Sky and Light Trespass environments.

Mounting Die-cast aluminum Adjustable Arm has a field splice compartment and fits on a 2 3/8'' O.D. x 4 3/8'' long tenon. Two (2) ½-20 UNC stainless steel screws secure the fritter assembly to the tenon. The assembly has aiming capabilities of +90 Degree to -65 Degree. Aiming adjustments are made via a single ½-13 hex socket cap screw. Cast aluminum curved arm, with bolt guides, back plate and mounting hardware. The assembly is adaptable to either square or round poles with diameters of 3'', 4'', and 5'' or wall mounted. The pole, arm and fixture are connected by a mechanical draw systems that incorporates two (2) 3/8-16 UNC Zinc Chromated bolts. Cast aluminum horizontal slipfitter mounts over a 2 3/8'' O.D. horizontal mast arm. Two (2) ½-20 UNC stainless steel hex socket cap screws captivate the mast arm and level the fixture to compensate for arm sag. The leveling capability of the slipfitter is +/- 2.5 Degree. 12' of fixture input wiring is supplied. Straight aluminum extruded arm, with bolt guides, back plate and mounting hardware. The assembly is adaptable to either square or round poles with diameters of 3'', 4'', and 5''. The pole, arm and fixture are connected by a mechanical draw system that incorporates two (2) flange nuts and two (2) 3/8-16 UNC zinc Chromated threaded rods. Wall mount (W). Back plate included.
Housing 360 low-copper die-cast aluminum alloy . Tool-less lamp access. Hinged lens frame is cast aluminum with stainless steel spring latch for tool-less lamp access. A weatherproof ballast assembly isolates the ballast from water and heat for longer life. The optional photo control eye or twist-lock receptacle is located in the ballast enclosure for easy access via a removable door. All non-ferrous fasteners prevent corrosion and ensure longer life.
Finish Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications. For larger projects where a custom color is required, contact the factory for more information.
Lamping MH Mogul base: ED28. 150W HPS Mogul base: E23.5 250W-400W HPS Mogul base: E18.
Optical Assembly Precision formed, segmented specular aluminum internal cutoff reflector with horizontal lamp mounting. Reflector is rotatable in 90 Degree increments. Sealed optical chamber. Interchangeable reflectors. Clear tempered flat glass lens.
Electrical Assembly Ballast assemblies are mounted to an aluminum plate or spinning, which is mounted inside the ballast housing. 4kv rated mogul base porcelain socket. Nickel-plated screw shell with center contact.
Warranty Three-year limited warranty.
Certifications ETL Listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.
Width 33 3/4" (86cm)
Maximum Weight 50 lbs
Height 8 1/8" (21cm)
Ballast All HID ballasts are core and coil and regulated with power factors better than 90% (HPF). Ballast provides +/- 5% lamp power regulation with +/- 10% input voltage regulation. Ballasts are factory pre-wired and tested. Metal halide ballasts are capable of starting at -20 Degree F or -30 Degree C and HPS at -40 DegreeF or -40 DegreeC. NOTE: All ballasts are EISA / Title 20 / Title 24 compliant where applicable.
Maximum epa PA31C: 1.46 sq. ft.

Ordering Guide

Example: PA31 AT 3 A 1 150S E N

Product Code
  PA31 Profiler (large)  
Arm
  AT Adjustable Arm * 1
  C Curved Arm * 2
  HT Horizontal Slip Fitter * 1
  S Straight Arm * 2
Mounting
  3 3" O.D. Round Pole  
  4 4" O.D. Round Pole  
  5 5" O.D. Round Pole  
  S Square Pole  
  W Wall Mount  
Finish
image A Black  
image B White  
image H Bronze  
image I Gray  
Optics
  1 Type I  
  2 Type II  
  3 Type III  
  4 Type IV  
  5 Type V  
  F Forward Throw  
Wattage
  150S 150W HPS  
  250S 250W HPS  
  400S 400W HPS  
  150H 150W PMH  
image 250H 250W PMH  
image 320H 320W PMH  
Voltage
  E 120V  
  F 208V  
  G 240V  
  H 277V  
  K 347V  
  J 480V  
Options
  N None  
  B Button Eye Photo Control * 3
  DF Double Fusing [208V, 240V, 480V]  
  H House-Side Shield * 4
  Q Quartz Restrike * 5
  R Twist-lock Photo Control Receptacle  
  SF Single Fusing [120V, 277V, 347V]  
* 1 Do not specify "Mounting" option with these arms.
* 2 Order pole machined for this fixture.
* 3 Not available in 480V (J).
* 4 Not available with Type I (1), Type V (5) or Forward Throw (F) optics
* 5 Quartz Restrike option is not available in 480V.

Back to Top