Loading... Please wait...| Housing: | Aluminum parts have zinc-rich primer and thermoset powdercoat for durability. Faceplates are color-impregnated. Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications. Thermal Protection device is required for installations in drywall, plaster, wood or other non-masonry materials. Die-cast aluminum trim contains less than 0.3% copper to resist corrosion. (Note: Flange not included with CB100 fixture.). |
| Finish: | Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Composite is textured, pressure formed, molded-in-color. |
| Optical Assembly: | Opal Lens - made of UV stabilized injection molded polycarbonate. |
| Lamping: | 18W maximum S-8 (1141) lamp. Lamp is included with fixture. |
| Electrical Assembly: | Single contact bayonet (S-8). 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. |
| Warranty: | Three-year limited warranty. |
| Certifications: | ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards. ADA Compliant when used in indoor and outdoor wall applications. |
| Height: | 3 1/2" (89mm) |
| Width: | 9" (229mm) |
| Depth: | 4 11/16" (103mm) |
| Housing Height: | 2 11/16" (68mm) |
| Housing Width: | 8 1/8" (207mm) |
| Max. Weight: | 3.5 lb |