Loading... Please wait...

  • Bronze finish
Image may not necessarily reflect actual finish. Please refer to the product description

Hadco Lighting RSB2 Bricklyte



Free Shipping for Order over $50Price Change
List Price:
Usually Ships Out In 4 to 6 Business Days if Available, Premium Finish in 5 Weeks


Housing:Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications.   Gasketing is silicone.  Fasteners are 300 series stainless steel.  Die-cast aluminum trim ring contains less than 0.3% copper to resist corrosion.  Note: Recessed housing contains four (4) ½" NPS conduit inlets (two (2) on bottom and one on each side) and internal pull-through wiring compartment.  Thermal Protection device is required for installations in drywall, plaster, wood or other non-masonry materials.
Finish:Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting.  Zinc-rich primer and thermoset powdercoat for durability.  Composite is pressure formed, molded-in color.
Optical Assembly:UV stabilized, injection molded polycarbonate bubble faceplate, reinforced with frosted tempered glass, with stainless steel screws.  Symmetric reflector is precision formed, semi-specular aluminum or highly polished aluminum, which produces a wide symmetric distribution for general area lighting.
Lamping:13W PLC Fluorescent (120V: GX23-2; 277V: G24Q-1).  18W CFL (G24Q-2).  40W maximum T10 (4KV porcelain mini-can base).  Lower wattage lamps are acceptable.  Lamp is not included.
Electrical Assembly:Fixture is pre-wired with 18 AWG black, white, and ground wires.
Ballast:The ballast for 18W CF shall be electronic 50 or 60Hz. The ballast for 9 and 13W CF shall be class B core and coil HPF rated for 0 degree starting temperature.   13W Fluorescent 120V: Core and coil, NPF, 0°C minimum start. 13W 277V: Electronic, 0°C minimum start.
Warranty:Three-year limited warranty.
Certifications:ETL listed to U.S. safety standards for wet locations.  cETL listed to Canadian safety standards for wet locations.  Manufactured to ISO 9001:2008 Standards.  ADA Compliant when used in indoor and outdoor wall applications.
Height:3 1/2" (89mm)
Width:9" (229mm)
Depth:4 1/2"
Housing Height:2 11/16" (68mm)
Housing Width:8 1/8" (207mm)
Max. Weight:1.45 lb
Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Sign Up To Our Newsletter

'Louie Lighting; Expert Affordable Lighting Solutions & Custom Lighting Services'
Louie Lighting, Inc. BBB Business Review