Loading... Please wait...
1 (877) 385-2104
Call for FREE advice for our lighting experts
)
Image may not necessarily reflect actual finish. Please refer to the product description or
- Home
- Outdoor Lighting
- Outdoor Step Lighting
- Hadco Lighting RRFL Round Steplyte Low Voltage
Hadco Lighting RRFL Round Steplyte Low Voltage
| Housing: | Housing and finish ring are die-cast aluminum. Aluminum housing contains less than 0.3% copper to prevent corrosion in concrete applications. Flange made of die-cast aluminum containing less than 0.3% copper to resist corrosion. Single-piece molded silicone gasket to prevent water, dust, and insect filtration. |
| Finish: | Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. |
| Optical Assembly: | High performance aluminum reflector for optimum symmetrical light output. Opal Lens - made of UV stabilized injection molded polycarbonate. |
| Lamping: | Lower wattage lamps are acceptable. Lamp is included with fixture. 12W maximum S-8 (93) lamp. |
| Electrical Assembly: | Single contact bayonet (S-8). 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. |
| Warranty: | Three-year limited warranty. |
| Certifications: | ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards. ADA Compliant when used in indoor and outdoor wall applications. |
| Height: | 4" (102mm) |
| Depth: | 3 9/16" (90mm) |
| Max. Weight: | 1.35 lb. |
Product information for RRFL14:
| Housing: | Housing and finish ring are die-cast aluminum. Aluminum housing contains less than 0.3% copper to prevent corrosion in concrete applications. Flange made of die-cast aluminum containing less than 0.3% copper to resist corrosion. Single-piece molded silicone gasket to prevent water, dust, and insect filtration. |
| Finish: | Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. |
| Optical Assembly: | High performance aluminum reflector for optimum symmetrical light output. Opal Lens - made of UV stabilized injection molded polycarbonate. |
| Lamping: | 10W maximum T3 bi-pin lamp. Lower wattage lamps are acceptable. |
| Electrical Assembly: | Single contact bayonet (S-8). Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. |
| Warranty: | Three-year limited warranty. |
| Certifications: | ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards. ADA Compliant when used in indoor and outdoor wall applications. |
| Height: | 4" (102mm) |
| Depth: | 3 9/16" (90mm) |
| Max. Weight: | 1.3 lb. |
