Loading... Please wait...
1 (877) 385-2104
Call for FREE advice for our lighting experts
)
Image may not necessarily reflect actual finish. Please refer to the product description or
- Home
- Outdoor Lighting
- Outdoor Step Lighting
- Hadco Lighting RRBL Round Mini Steplyte Low Voltage
Hadco Lighting RRBL Round Mini Steplyte Low Voltage
| Housing: | Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications. Flange made of die-cast aluminum containing less than 0.3% copper to resist corrosion. Single-piece molded silicone gasket to prevent water, dust, and insect filtration. Fasteners are 300 series stainless steel. Internal wiring compartment contains two (2) ½" NPT conduit taps in the bottom and one (1) ½" NPT conduit tap in both sides. A removable plug will be provided for one (1) tap. |
| Finish: | Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications. |
| Optical Assembly: | High performance aluminum reflector for optimum symmetrical light output. UV stabilized injection molded clear polycarbonate bubble lens, allowing positioning of lamp to project out of the wall enabling and efficient wide distribution. |
| Lamping: | 12W maximum S-8 (93) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. |
| Electrical Assembly: | Single contact bayonet (S-8). 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. |
| ACCESSORIES: | MAKM - Masonry construction mounting kit. MAKNS - New stud wall construction mounting kit. MAKES - Existing stud wall construction mounting kit. |
| Warranty: | Three-year limited warranty. |
| Certifications: | ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards. ADA Compliant when used in indoor and outdoor wall applications. |
| Height: | 4" (102mm) |
| Depth: | 3 9/16" (90mm) |
| Max. Weight: | 1.54 lb. |
Product information for RRBL14:
| Housing: | Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications. Flange made of die-cast aluminum containing less than 0.3% copper to resist corrosion. Single-piece molded silicone gasket to prevent water, dust, and insect filtration. Fasteners are 300 series stainless steel. Internal wiring compartment contains two (2) ½" NPT conduit taps in the bottom and one (1) ½" NPT conduit tap in both sides. A removable plug will be provided for one (1) tap. |
| Finish: | Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications. |
| Optical Assembly: | High performance aluminum reflector for optimum symmetrical light output. UV stabilized injection molded clear polycarbonate bubble lens, allowing positioning of lamp to project out of the wall enabling and efficient wide distribution. |
| Lamping: | 10W maximum T3 bi-pin lamp. Lower wattage lamps are acceptable. Lamp is not included. |
| Electrical Assembly: | Single contact bayonet (S-8). 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. |
| ACCESSORIES: | MAKM - Masonry construction mounting kit. MAKNS - New stud wall construction mounting kit. MAKES - Existing stud wall construction mounting kit. |
| Warranty: | Three-year limited warranty. |
| Certifications: | ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards. ADA Compliant when used in indoor and outdoor wall applications. |
| Height: | 4" (102mm) |
| Depth: | 3 9/16" (90mm) |
| Max. Weight: | 1.45 lb. |
