Loading... Please wait...

  • Hadco Lighting I3.5-HID Line Voltage HID Inground Light
  • Application View - Hadco Lighting I3.5-HID Line Voltage HID Inground Light
  • Bronze Rock Guard - Hadco Lighting I3.5-HID Line Voltage HID Inground Light
  • Application View - Hadco Lighting I3.5-HID Line Voltage HID Inground Light
Image may not necessarily reflect actual finish. Please refer to the product description

Hadco Lighting I3.5-HID Line Voltage HID Inground Light

Item#

I3.5-HID

Free Shipping for Order over $50Price Change
List Price:
$1,738.50
Price:
$760.00
Availability:
Usually Ships Out In 5 Weeks

 


The revolutionary i3.5 composite inground provides optimum performance in a small aperture luminaire. Patented design elements including a hinged lens ring, potted factory seal, cool lens option and only 2 screws that do not require a torque wrench - the i3.5 reinforces HADCO's position as the leader in landscape lighting.

Housing Single-piece compression molded fiberglass reinforced polyester composite, factory pressure tested to ensure water will not wick or leak through. Separate sealed compartments provide isolation between field wiring, optics, and ballast. Isolated, grade-mounted sealed wiring compartment with two (2) 3/4" threaded conduit inlets in bottom for feed-through wiring capabilities and supplied with gel-filled wire nuts. Cast cover to match trim ring with two captive stainless steel slotted Phillips machine screws for access. Trim ring is natural cast bronze. Rock guard used for directional glare control made of natural cast bronze. Ring is factory pre-drilled for optional guard. Potted factory seal with anti-wicking wiring between grade-level junction compartment and ballast compartment. Isolated ballast compartment with slotted, silicone-gasket cover. Lens ring is hinged with two captive stainless slotted Phillips machine screws for access to lamping compartment (tamper-resistant screws available upon request.)
Finish Composite is pressure formed, molded-in color. Natural bronze has satin matte finish.
Lamping 150W maximum MH G12 base: T6 100W maximum MH medium base: E17 Lamp is not included.
Optical Assembly Reflectors for T6 available for asymmetric and symmetric pattern. Aiming 15° either side of vertical and full 360° rotation. Angle degree marks for precise vertical aiming with tool-less aiming. Clear, slightly convexed, molded borosilicate glass, high impact, 3000 lb. live load rated, drive-over glass, with molded wrap around 100% silicone lens gasket. Sealed optical chamber. Handle enables easy tool-less removal of optical Assembly for hot aiming and re-lamping, simply press-fit back into place. High performance aluminum reflector for optimum symmetrical light output. Reflectors for E17 available for spot or flood beam pattern.
Electrical Assembly Bi-pin socket type (G12) for T6 lamps, with 250° Celsius high temperature teflon coated wire leads. Slotted ballast Assembly with Quick Disconnects mounted to cast aluminum bracket for easy maintenance. 4kv rated porcelain medium base. Nickel-plated screw shell with center contact.
Warranty Ten-year limited warranty.
Certifications Manufactured to ISO 9001: 2008 Standards. ADA compliant when used in concrete and flush mounted with CPS25. ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations.
Width 11 3/8" (289mm)
Depth 14 5/8" (372mm)
Height 17" (432mm)
Ballast All metal halide HID ballasts are e-Vision universal electronic that automatically detect 120-277 volts, 50/60 Hz and are regulated with power factors better than 90% (HPF). Ballast provides +/- 5% lamp power regulation with +/- 10% input voltage regulation, sound rated "A", thermally protected, internally fused, output is short circuit protected, no PCBs. Ballasts are factory pre-wired and tested. Metal Halide ballasts are capable of starting at -20° F or -30° C.
Wattage 100H 100W MH, 150T6 150W MH T6
Optics HA Horizontal Asymmetric *3, HS Horizontal Symmetric *3, FL Flood *2, SP Spot *2
Ip Rating IP66/68: Dust-tight and dual rated - sealed against direct jets of water and against continuous submersion in water tested to 1 meter (3.28 feet).

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Sign Up To Our Newsletter

'Louie Lighting; Expert Affordable Lighting Solutions & Custom Lighting Services'
Louie Lighting, Inc. BBB Business Review