Loading... Please wait...

  • Hadco Lighting RSC2-P Line Voltage Aluminum Step Light with Insulation Detector
  • White Finish - Hadco Lighting RSC2-P Line Voltage Aluminum Steplyte
  • Bronze Finish - Hadco Lighting RSC2-P Line Voltage Aluminum Steplyte
Image may not necessarily reflect actual finish. Please refer to the product description

[CS]Select Finish=Bronze:103904.preview.jpg,[S]Select Lamp/Wattage=42W CFL,[S]Select Volt=277V,[S]Select Optics=Symmetric

Item#

RSC2-P

Free Shipping for Order over $50Price Change
List Price:
$410.04
Price:
$206.86
Availability:
Usually Ships Out In 5 Weeks

 


Housing Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications. Die-cast aluminum trim ring contains less than 0.3% copper to resist corrosion. Cast bronze fixture has polycarbonate, color impregnated, dark bronze finish. Cast bronze louver is natural cast bronze with frosted tempered glass. Die-cast copper-free aluminum with 45° cutoff, with frosted tempered glass. Gasketing is silicone. Fasteners are 300 series stainless steel. Note- Recessed housing contains four (4) ½" NPS conduit inlets (two (2) on bottom and one on each side) and internal pull-through wiring compartment.
Finish Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Zinc-rich primer and thermoset powdercoat for durability.
Lamping 9W PLS Fluorescent (G23). 13W PLC Fluorescent (120V- GX23-2; 277V- G24Q-1). 18W CFL8W maximum S-8 (1141) lamps (Single contact bayonet base). 40W maximum T10 (4KV porcelain mini-can base). Lower wattage lamps are acceptable.
Optical Assembly Symmetric reflector is precision formed, steel with a white reflective coating. The cast louver offers lower light levels with cut-off for lighting stairways or general lighting where shielding of the light source is more important than high light levels.
Electrical Assembly Fixture is pre-wired with 18 AWG black, white, and ground wires. 1141 lamps use an integral 120V/12V transformer.
Warranty Three-year limited warranty.
Certifications ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001-2008 Standards. ADA Compliant when used in indoor and outdoor wall applications.
Width 9" (229mm)
Maximum Weight 3.64 lb.
Depth 3 1/2" (90mm)
Height 3 1/2" (90mm)
Ballast The ballast for 18W CF shall be electronic 50 or 60Hz. The ballast for 9 and 13W CF shall be class B core and coil HPF rated for 0 degree starting temperature. 13W Fluorescent 120V- Core and coil, NPF, 0°C minimum start. 13W 277V- Electronic, 0°C minimum start. 9W Fluorescent ballast is core and coil, NPF, 0°C minimum start.
Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Sign Up To Our Newsletter

'Louie Lighting; Expert Affordable Lighting Solutions & Custom Lighting Services'
Louie Lighting, Inc. BBB Business Review