Loading... Please wait...
1 (877) 385-2104
Call for FREE advice for our lighting experts
){kind=tracking}
Image may not necessarily reflect actual finish. Please refer to the product description or
- Home
- Outdoor Lighting
- Landscape and Path Lighting
- Path Lighting
- Hadco Lighting DWC1-A Composite Mini Beacon Black 120V
Hadco Lighting DWC1-A Composite Mini Beacon Black 120V
| Housing: | Single-piece compression molded fiberglass reinforced polyester composite, factory pressure tested to ensure water will not wick or leak through. Single-piece molded silicone gasket to prevent water, dust, and insect filtration. Fasteners are 300 series stainless steel. Two (2) ½" conduit inlets at bottom. Note: Watertight connectors and potting compound (by others) must be used to maintain a watertight seal at conduit entry points. |
| Finish: | Composite is textured, pressure formed, molded-in-color. |
| Optical Assembly: | Frosted borosilicate glass. |
| Lamping: | 20W maximum T3 bi-pin lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. |
| Electrical Assembly: | Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 120VAC, 60Hz input to step-down transformer. 12VAC output to fixture, for use with low voltage lamps. Fixture is pre-wired with 18 AWG black, white, and ground wires. |
| Warranty: | Ten-year limited warranty. |
| Certifications: | ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards. |
| Height: | 8 3/16" (224mm) |
| Width: | 4 15/16" (126mm) |
| Max. Weight: | 2.5 lb. |
