Due to current Philips Lighting consolidation of their lighting lines including Hadco, orders may be delayed in shipping. We will try to have your order fulfilled and shipped as quickly as possible.
The DUL1 Round Composite Decklyte Low Voltage from Hadco Lighting is a round deck light in verde finish, which is textured, pressed and molded in color. It is housed in a single piece injection molded ULTEM polymer composite, known for its superior performance. The optical assembly for dispersal of light is a frosted, annealed glass lens with a stamped aluminium reflector. The DUL1 Decklyte works on low voltage and can support bulbs up to 10 watts. The wire leads are Teflon coated for better insulation and heat resistance. The Decklyte is 89 mm in diameter and 48 mm thick with the preferred installation being vertical. Being a product of Hadco Lighting, the DUL1 Composite Decklyte is manufactured to ISO 9001:2008 standards.
|Housing:||One-piece injection molded ULTEM® High Performance Polymer composite. Fasteners are 300 series stainless steel.|
|Finish:||Composite is textured, pressure formed, molded-in-color.|
|Optical Assembly:||Frosted, annealed glass lens Reflector is a stamped specular aluminum.|
|Lamping:||10W maximum T3 bi-pin lamp. 10W T3 lamp is included with fixture. Lower wattage lamps are acceptable.|
|Electrical Assembly:||Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.|
|Installation & Mounting||Two (2) Stainless #8 wood screws (supplied) via key slots.|
|Warranty:||Ten-year limited warranty.|
|Certifications:||ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.|
|Height:||3 1/2" (89mm)|
|Width:||3 1/2" (89mm)|
|Depth:||1 7/8" (48mm)|
|Max. Weight:||0.20 lb|