Due to current Philips Lighting consolidation of their lighting lines including Hadco, orders may be delayed in shipping. We will try to have your order fulfilled and shipped as quickly as possible.
The DSL2 Square Surface Downlyte W. Bracket from Hadco Lighting is a low voltage spot light mostly used indoors. The DSL2 has a machined aluminium top cap and a cast aluminium body with powder coating and a frosted tempered glass lens. It uses lamps of up to 18 watts power and operates at a voltage of 12 volts. The light fixture is shaped like a cube with each side being about 64 mm wide and the overall length being about 92 mm. Due to the use of aluminium housing, the natural finish of the DSL2 is white. The bracket allows the light to be focused wherever desired to enhance the look of the space.
|Housing:||Machined aluminum top cap and cast aluminum body with adjustable yoke. Fasteners are 300 series stainless steel.|
|Finish:||Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications.|
|Optical Assembly:||Frosted tempered glass lens.|
|Lamping:||18W maximum S-8 (1141) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable.|
|Electrical Assembly:||Single contact bayonet (S-8). 12 Volt fixture is pre-wired with 8-ft pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.|
|Warranty:||Three-year limited warranty.|
|Certifications:||ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.|
|Height:||3 5/8" (92mm)|
|Width:||2 1/2" (64mm)|
|Max. Weight:||0.8 lb|