Loading... Please wait...The DCL1D-N LED Brass Decklyte Low Voltage from Hadco Lighting consists of die cast brass housing with a frosted, annealed glass lens and a stamped aluminium reflector. It is an outdoor low voltage deck lighting fixture which gives out white light at a color temperature rating of 3-4,000 Kelvin and has over 50,000 hours of operational life, if maintained at an ambient temperature of 25o with 70% luminescence. The DCL1D-N Decklyte is insulated against both direct water jets as well as immersion in water. This 89 mm diameter and 48 mm thick deck light is dust-proof and its 5 year manufacturer warranty is backed by Hadco Lighting and the 50 years of experience of Philips Lighting, who are experts in the areas of energy efficient lighting devices.
| Housing: | Die-cast brass. Fasteners are 300 series stainless steel. |
| Finish: | Natural Brass (N) is as-cast and tumble polished. |
| Optical Assembly: | Frosted, annealed glass lens Reflector is a stamped specular aluminum. |
| Lamping: | Color Temperature (CCT): cool white (4,000K nominal) or warm white (3,000K nominal). Approximately 50,000 hours of operational life (at 25°C ambient temp. and 70% lumen maintenance). >80 CRI. |
| Electrical Assembly: | Input voltage range (VAC): 11 - 15, (Magnetic low voltage transformer required). 1.7 total watts consumed. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. |
| Installation & Mounting | Two (2) Stainless #8 wood screws (supplied) via key slots. |
| IP Rating: | IP67: Dust-tight and dual rated - sealed against direct jets of water and against continuous immersion up to a depth of 1 meter (3.28 feet). |
| Warranty: | Five-year limited warranty. |
| Certifications: | ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards. |
| Height: | 3 1/2" (89mm) |
| Width: | 3 1/2" (89mm) |
| Depth: | 1 7/8" (48mm) |
| Max. Weight: | 0.95 lb |