Due to current Philips Lighting consolidation of their lighting lines including Hadco, orders may be delayed in shipping. We will try to have your order fulfilled and shipped as quickly as possible.
The Hadco Lighting DCL1-N Brass Decklyte Low Voltage is a deck light from Hadco Lighting, which operates on low voltage and can power bulbs of up to 10 watts. Hadco from Philips Lighting has more than half a century of expertise in manufacturing quality decorative lighting products for outdoor and landscape lighting. The DCL-1 N Brass Decklyte has die cast brass housing with stainless steel fasteners for better durability and resistance to exposure to the elements. This tumble polished deck light is 3 ½” in diameter and 48 mm with the light area covered by frosted, annealed glass for better light dispersal compared to other equivalent lights. The DCL1-N Decklyte is mostly used for vertical installations (along walls, etc.).
|Housing:||Die-cast brass. Fasteners are 300 series stainless steel.|
|Finish:||Natural Brass (N) is as-cast and tumble polished.|
|Optical Assembly:||Frosted, annealed glass lens Reflector is a stamped specular aluminum.|
|Lamping:||10W maximum T3 bi-pin lamp. 10W T3 lamp is included with fixture. Lower wattage lamps are acceptable.|
|Electrical Assembly:||Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.|
|Installation & Mounting||Two (2) Stainless #8 wood screws (supplied) via key slots.|
|Warranty:||Lifetime limited warranty.|
|Certifications:||ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.|
|Height:||3 1/2" (89mm)|
|Width:||3 1/2" (89mm)|
|Depth:||1 7/8" (48mm)|
|Max. Weight:||0.95 lb|