This is the Hadco DB30 Fluorescent & High-intensity discharge lamps version. Click here to see the Hadco DB30 for Incandescent Medium Base A19. lamps
|Housing:||356 HM high-strength, low-copper, proprietary cast aluminum alloy . Dome roof with die-cast aluminum louvers. Easy access to lamp. 5? dia. extruded aluminum with a wall thickness of 0.125?. All non-ferrous fasteners prevent corrosion and ensure longer life.|
|Finish:||Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications. For larger projects where a custom color is required, contact the factory for more information.|
|Optical Assembly:||Symmetric. Die-cast aluminum louvers with underside painted with highly reflective white powdercoat. Tempered glass globe.|
|Lamping:||LED 4Kv medium base procelain socket A19. |
MH and HPS Medium base: E17.
Incandescent Medium Base A19.
26W CFL (GX24Q-3).
32W CFL (GX24Q-3).
42W CFL (GX24Q-4).
|Electrical Assembly:||LED is 2700K warm white, delivers 800 lumens, and is dimmable. Lamp life is rated at 25,000 hours. 120 volt only. 4Kv rated medium base porcelain socket. |
Key-slotted Ballast Assembly is mounted to an aluminum plate, which is mounted inside the base. Quick disconnects for easy installation and removal.
4kv rated medium base porcelain socket. Nickel-plated screw shell with center contact.
26W Fluorescent socket is a GX24Q-3 base.
32W Fluorescent socket is a GX24Q-3 base.
42W Fluorescent socket is a GX24Q-4 base.
|Ballast:||All HID ballasts are core and coil and regulated with power factors better than 90% (HPF). Ballast provides +/- 5% lamp power regulation with +/- 10% input voltage regulation. Ballasts are factory pre-wired and tested. Metal halide ballasts are capable of starting at -20° F or -30° C and HPS at -40°F or -40°C. NOTE: All ballasts are EISA / Title 20 / Title 24 compliant where applicable. Fluorescent ballast is electronic. Ballast is capable of starting at 0° F or -18° C. Ballast is factory wired and tested.|
|Installation & Mounting:||Tube is mounted to the base plate with three (3) 5/16-18 flat head allen key stainless steel tamper-resistant screws.|
|Warranty:||Three-year limited warranty.|
|Certifications:||ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.|
|Bolt Circle:||3" (8 cm)|
|Anchor Rods:||Internal (3) 3/8" dia. x 8" long (1 cm x 20cm)|
|Base Diameter:||5" (13cm)|
|Max. Weight:||Powdercoat: 15 lbs|
|Max. Weight:||CraftStone: 19 lbs|