Loading... Please wait...
  • My Account
  • Wish Lists
  • Sign in or Create an account
  • Bronze finish
  • Stainless Steel finish

Hadco Lighting DAL1D Round LED Aluminum Decklyte Low Voltage

Product Item#
List Price:
(You save $99.14)
Usually Ships Out In 5 Weeks

Product Price May Change Based On Options Selected

Free Shipping

Product Description


The Hadco Lighting DAL1D Round LED Aluminum Decklyte Low Voltage uses a frosted, annealed glass lens to disperse the light from its LED bulb. Hadco being a part of Philips, all Hadco products subscribe to Philips’ manufacturing policies and philosophies and are manufactured to ISO 9001:2000 standards. The DAL1D Round Decklyte is housed in cast aluminium powder coated to give bronze and stainless steel finishes. The light emitted by the DAL1D Decklyte is white, in the range of 3-4,000 Kelvin and the lamp has an operational life of about 50,000 hours (at 25o C ambient temperature and 70% lumen). The round Decklyte has a diameter of about 3 ½” and is about 48 mm thick. The DAL1D is supremely rugged, dust-resistant and water-proof – it is sealed even against a direct jet of water and immersion up to a depth of 1 meter. It comes with a 5 year manufacturer warranty.

Housing: Body and mounting plate are cast aluminum construction. Fasteners are 300 series stainless steel.
Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications.
Optical Assembly: Frosted, annealed glass lens Reflector is a stamped specular aluminum.
Lamping: Color Temperature (CCT): cool white (4,000K nominal) or warm white (3,000K nominal). Approximately 50,000 hours of operational life (at 25°C ambient temp. and 70% lumen maintenance). >80 CRI.
Electrical Assembly: Input voltage range (VAC): 11 - 15, (Magnetic low voltage transformer required). 1.7 total watts consumed. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire.
Installation & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots.
IP Rating: IP67: Dust-tight and dual rated - sealed against direct jets of water and against continuous immersion up to a depth of 1 meter (3.28 feet).
Warranty: Five-year limited warranty.
Certifications: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.
Height: 3 1/2" (89mm)
Width: 3 1/2" (89mm)
Depth: 1 7/8" (48mm)
Max. Weight: 0.30 lb

Find Similar Products by Category

Back to Top