Due to current Philips Lighting consolidation of their lighting lines including Hadco, orders may be delayed in shipping. We will try to have your order fulfilled and shipped as quickly as possible.
The Hadco Lighting DAL1 Aluminum Decklyte Low Voltage is made out of cast aluminium with a frosted, annealed glass lens reflector to impart light. The DAL1 is an outdoor deck light fixture, which needs 2 screws to be installed and works on low voltage with a maximum lamp output of up to 10 watts. The low voltage light fixture is a testimony to Philips Hadco’s commitment to the creation of energy efficient lighting devices. It is a perfectly spherical shaped light with a diameter of about 3 ½” and a depth of about 48 mm. The external powder coating allows for better weather resistance and superior durability of color, shine and luster. The DAL1 Decklyte is available in bronze and stainless steel finishes.
|Housing:||Body and mounting plate are cast aluminum construction. Fasteners are 300 series stainless steel.|
|Finish:||Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications.|
|Optical Assembly:||Frosted, annealed glass lens Reflector is a stamped specular aluminum.|
|Lamping:||10W maximum T3 bi-pin lamp. Lower wattage lamps are acceptable. 10W T3 lamp is included with fixture.|
|Electrical Assembly:||Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.|
|Installation & Mounting:||Two (2) Stainless #8 wood screws (supplied) via key slots.|
|Warranty:||Three-year limited warranty.|
|Certifications:||ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.|
|Height:||3 1/2" (89mm)|
|Width:||3 1/2" (89mm)|
|Depth:||1 7/8" (48mm)|
|Max. Weight:||0.30 lb|