Loading... Please wait...| Housing: | One-piece injection molded ULTEM® High Performance Polymer composite. Fully-adjustable swivel arm with vibration-proof locking teeth. Fasteners are 300 series stainless steel. ½" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. |
| Finish: | Composite is textured, pressure formed, molded-in-color. |
| Optical Assembly: | Integral collimating spot (8°) optics. Integral collimating narrow flood (24°) optics. Integral collimating wide flood (40°) optics. Clear tempered glass lens. |
| Lamping: | White high brightness (HB) LEDs. Deliver 70% lumen maintenance at 50,000 hours. Cool white (4,000K nominal). Warm white (3,000K nominal). |
| Electrical Assembly: | Input voltage range (VAC): 10.8 - 17.5. Input frequency: 60Hz. (magnetic low voltage transformer required). Integral surge protector built into LED driver circuit. 12 volts, 12.4 total watts consumed (high power) or 5 total watts consumed (low power). Powered by Advance™: Integral Advance™ electronic LED driver. UL class2. -40ºC/F minimum starting temperature. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. |
| Warranty: | Ten-year limited warranty. |
| Certifications: | ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards. |
| IP Rating: | IP66: Dust-tight and sealed against direct jets of water. |
| Width: | 3 7/8" (98mm) |
| Length: | 8 1/2" (216mm) |
| Max. Weight: | 1.45 lb |