Loading... Please wait...
)
- Home
- Outdoor Lighting
- Landscape and Path Lighting
- Hadco Lighting BUL16 Composite Bullyte Low Voltage Accent
Hadco Lighting BUL16 Composite Bullyte Low Voltage Accent
Available in black, bronze and verde finishes, Hadco Lighting’s BUL16 Composite Bullyte Low Voltage Accent lights are made with a single piece injection molded ULTEM© high performance polymer composite. The swivel arm is fully adjustable and made of the same material. The fasteners are made of stainless steel and the gaskets of silicone. The entire assembly of the BUL16 Composite Bullyte is made of materials which are weather-proof and durable. The tempered glass on the light surface is tilted at an angle of 10o so as to be self-cleaning. The wiring is coated with Teflon for heat and electrical shock resistance and to allow the fixture to operate even in wet conditions. The BUL16 spot light works on low voltage and can handle bulbs of up to 35 watts and comes with a ten year warranty. In keeping with Hadco’s philosophy, the Hadco Lighting BUL16 Bullyte transforms the surrounding space and enhances the quality of life with its light.
| Housing: | One-piece injection molded ULTEM® High Performance Polymer composite. Fully rotatable shroud, gasketed, ULTEM® High Performance Polymer composite. Fully-adjustable swivel arm with vibration-proof locking teeth. ½" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. Fasteners are 300 series stainless steel. Gasketing is silicone. |
| Finish: | Composite is textured, pressure formed, molded-in-color. |
| Optical Assembly: | Clear tempered glass affixed at 10° angle for natural cleaning. |
| Lamping: | 35W maximum MR16 bi-pin lamp. Lower wattage lamps are acceptable. Covered MR16 are recommended to protect lamps inner capsule. |
| Electrical Assembly: | Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads. Stainless steel retention clip affixed to socket to securely hold lamp in place. The wires are permanently fused to the clip. Stainless Steel lamp clip is designed to prevent arching of bi-pin and also acts as a heat sync to keep heat away from the socket. Electrical internal connectors are stainless steel 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. |
| Warranty: | Ten-year limited warranty. |
| Certifications: | ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards. |
| Width: | 2 1/8" (80m/td> |
| Length: | 6 1/2" (165mm) |
| Max. Weight: | 1.16 lb |
