Loading... Please wait...
)
- Home
- Outdoor Lighting
- Landscape and Path Lighting
- Path Lighting
- Hadco Lighting AL41-G Aluminum 12V Pathlyte with Stake
Hadco Lighting AL41-G Aluminum 12V Pathlyte with Stake
The AL41-G Aluminum 12V Pathlyte Verde from Hadco Philips has die-cast aluminium housing and an extruded aluminium stem with a stainless steel hinge and spring lock on the roof. This low voltage path light from Hadco uses lamps of up to 20 watts to give downward focused light through the use of frosted tempered glass shield with silicone gaskets. An electrostatic application of thermoset polyester powder coating ensures weather resistance and durability of finish to make it an effective outdoor light suited for pathways and walkways. The entire assembly is 518 mm long and 183 mm wide at the top. The impression given by the AL41-G is one of a traditional street lantern placed on a cobbled pathway. Hadco Philips has successfully transformed an age-old design into a modern electrical fixture, complete with low voltage compatibility and better electrical insulation and finish to withstand wet conditions.
| Housing: | Die-cast aluminum. Stem is extruded aluminum. Roof has dual stainless steel hinge with stainless steel spring-lock for tool-less entry and relamping. Finial is a clear seeded glass that sparkles when illuminated. ½" NPS male threads to screw onto accessory mounting stake or junction box, sold separately. |
| Finish: | Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications. |
| Optical Assembly: | Frosted tempered glass sprinkler shield includes top and bottom silicone gaskets for tight seal. Spun aluminum reflector with white thermoset powdercoat. |
| Lamping: | 20W maximum T3 bi-pin lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. |
| Electrical Assembly: | Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. |
| Warranty: | Three-year limited warranty. |
| Certifications: | ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards. |
| Height: | 20 3/8" (518mm) |
| Width: | 7 1/4" (183mm) |
| Max. Weight: | 2.2 lb. |
