Loading... Please wait...

  • Hadco Lighting RSF2-T10 120 Volt Polycarbonate Step Light-T10 Lamp
Image may not necessarily reflect actual finish. Please refer to the product description

Hadco Lighting RSF2-T10 120 Volt Polycarbonate Step Light-T10 Lamp

Item#

RSF2-T10

Free Shipping for Order over $50Price Change
List Price:
$336.01
Price:
$169.51
Availability:
Usually Ships Out In 4 to 6 Business Days if Available

 


Housing Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications. Die-cast aluminum trim ring contains less than 0.3% copper to resist corrosion. Cast bronze fixture has polycarbonate, color impregnated, dark bronze finish. Cast bronze faceplate has polycarbonate color impregnated, dark bronze finish. Gasketing is silicone. Fasteners are 300 series stainless steel. Note- Recessed housing contains four (4) ½" NPS conduit inlets (two bottom and one on each side) and internal pull-through wiring compartment.
Finish Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Zinc-rich primer and thermoset powdercoat for durability.
Lamping 18W CFL3W PLC Fluorescent (120V- GX23-2; 277V- G24Q-1). 40W maximum T10 (4KV porcelain mini-can base). Two 18W maximum S-8 (1141) lamps (Single contact bayonet base). Lower wattage lamps are acceptable.
Optical Assembly Opal Lens - made of UV stabilized injection molded polycarbonate.
Electrical Assembly Supply wires connect directly to the quick connect on the integral power supply. Fixture is pre-wired with 18 AWG black, white, and ground wires.
Warranty Three-year limited warranty. Three-year limited warranty.
Certifications ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001-2008 Standards. ADA Compliant when used in indoor and outdoor wall applications.
Width 9" (229mm)
Maximum Weight 3.65 lb.
Depth 3 1/2" (90mm)
Height 3 1/2" (90mm)
Ballast 13W Fluorescent 120V- Core and coil, NPF, 0°C minimum start. 13W 277V- Electronic, 0°C minimum start. 9W Fluorescent ballast is core and coil, NPF, 0°C minimum start. The ballast for 18W CF shall be electronic 50 or 60Hz. The ballast for 9 and 13W CF shall be class B core and coil HPF rated for 0 degree starting temperature.
Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Sign Up To Our Newsletter

'Louie Lighting; Expert Affordable Lighting Solutions & Custom Lighting Services'
Louie Lighting, Inc. BBB Business Review