Categories

 Loading... Please wait...
=
  • My Account
  • Wish Lists
  • Sign in or Create an account
  • Hadco Lighting RSV2-LED 120 Volt LED Aluminum Step Light

Hadco Lighting RSV2-LED 120 Volt LED Aluminum Step Light

Product Item#
RSV2-LED
List Price:
$621.69
Price:
$313.63
(You save $308.06)
Shipping:
Calculated at checkout
Availability:
Usually Ships Out In 5 Weeks

Product Price May Change Based On Options Selected

Product Description

 


Housing Cool external temperatures - all below 33ºC - so the luminaire is cool to the touch, including the lens. Perfect for high pedestrian traffic and plant life applications. Exceeds European standard EN 563 both 1 second (85ºC for composite, 80ºC for glass) and 4 seconds (74ºC for composite, 70ºC for glass) of contact. Die-cast copper-free aluminum with 45° cutoff, with frosted tempered glass. Cast bronze louver is natural cast bronze with frosted tempered glass. Die-cast aluminum trim ring contains less than 0.3% copper to resist corrosion. Cast bronze fixture has polycarbonate, color impregnated, dark bronze finish. Die-cast aluminum back box contains less than 0.3% copper to prevent corrosion in concrete or masonry applications. Gasketing is silicone. Fasteners are 300 series stainless steel. Note- Recessed housing contains four (4) ½" NPS conduit inlets (two (2) on bottom and one on each side) and internal pull-through wiring compartment.
Finish Zinc-rich primer and thermoset powdercoat for durability. Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications.
Lamping White high brightness (HB) LEDs. Deliver 70% lumen maintenance at 50,000 hours. Cool white (5500K nominal).
Optical Assembly The cast louver offers lower light levels with cut-off for lighting stairways or general lighting where shielding of the light source is more important than high light levels. Reflector is formed from highly reflective aluminum. Warm (3000K), amber-colored tempered glass lens.
Electrical Assembly Powered by Advance„¢- Integral Advance„¢ electronic LED driver. UL class2. -40ºC/F minimum starting temperature. Pre-wired with high temperature 18 AWG wire. Input voltage range (VAC)- 108-132. Input frequency- 60Hz. Integral surge protector built into LED driver circuit. 4 totals watts (3) 1W LEDs, 6 total watts (5) 1W LEDs.
Warranty Five-year limited warranty.
Certifications ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001-2008 Standards. ADA Compliant when used in indoor and outdoor wall applications.
Width 3 1/4" (83mm)
Maximum Weight 3.6 lb.
Depth 3 1/2" (90mm)
Height 8 3/4" (222mm)
Wattage D3 3 1W LEDs, D5 5 1W LEDs
Lens W Amber glass lens
Optics K5 Symmetric Optics
Voltage E 120V

See more information in the Product Detail tab

Back to Top