Due to current Philips Lighting consolidation of their lighting lines including Hadco, orders may be delayed in shipping. We will try to have your order fulfilled and shipped as quickly as possible.
|Housing||One-piece injection molded ULTEM High Performance Polymer composite. Fully rotatable shroud, gasketed, ULTEM High Performance Polymer composite. Fully-adjustable swivel arm with vibration-proof locking teeth."½" NPS male threads to screw onto accessory mounting stake (included) or junction box (sold separately). Fasteners are 300 series stainless steel. Gasketing is silicone.||Finish||Composite is textured, pressure formed, molded-in-color.||Lamping||4W lamp with 24° beam spread. 30,000 hours life. Color temperature (CCT): warm white (2,700K nominal). No Mercury.||Optical Assembly||Clear tempered glass affixed at 10° angle for natural cleaning.||Electrical Assembly||Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads. Stainless steel retention clip affixed to socket to securely hold lamp in place. The wires are permanently fused to the clip. Stainless Steel lamp clip is designed to prevent arching of bi-pin and also acts as a heat sync to keep heat away from the socket. Electrical internal connectors are stainless steel 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.||Mounting||S7 Mounting Stake||Warranty||Ten-year limited warranty.||Certifications||ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.||Width||2 1/8" (80mm)||Length||6 1/2" (165mm)||Max. weight||1.16 lb||CCT||W Warm||Optics||NF Narrow Flood||Source/lumens||LED4 4W LED|