Loading... Please wait...
1 (877) 385-2104
Call for FREE advice for our lighting experts
){kind=tracking}
Image may not necessarily reflect actual finish. Please refer to the product description or
- Home
- Outdoor Lighting
- Landscape and Path Lighting
- Path Lighting
- Bollard Lights
- Hadco Lighting 1019-N Beacon Natural Brass, 120V
Hadco Lighting 1019-N Beacon Natural Brass, 120V
| Housing: | Natural cast bronze. Removable roof for easy relamping. Fasteners are 300 series stainless steel. Molded silicone gasket seals glass, top and bottom, and prevents moisture intrusion into the fixture. NOTE: The base has two (2) ½" NPT conduit entrances for connection to the power source. |
| Finish: | Natural Bronze (N) is as-cast, will age over time. |
| Optical Assembly: | Clear borosilicate glass refractor lens. Fully gasketed top and bottom. |
| Lamping: | 13W CFL (GX23D-2). 75W MV medium base E17 lamp. 100W maximum A19 lamp. |
| Ballast: | All HID ballasts are core and coil and regulated with power factors better than 90% (HPF). Ballast provides +/- 5% lamp power regulation with +/- 10% input voltage regulation. Ballasts are factory pre-wired and tested. Metal halide ballasts are capable of starting at -20° F or -30° C and HPS at -40°F or -40°C. NOTE: All ballasts are EISA / Title 20 / Title 24 compliant where applicable. Fluorescent ballast is core and coil, NPF Class B. Fluorescent ballast is capable of starting at 0° F or -18° C. Ballast is factory wired and tested. |
| Installation & Mounting | VOLTAGE CAUTION: Some local interpretation of the NEC Section 210-6 only permit the use of 120 volt fixtures when they are mounted below 8'. Check with local authorities before specifying alternate voltages. Lower housing may be recessed directly in the ground or in concrete. Beacons are partially recessed. Potting compound must be used to seal the conduit wire entry. |
| Warranty: | Lifetime limited warranty. |
| Certifications: | ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards. |
| Height: | 9 1/32" (229mm) |
| Width: | 8 3/8" (213mm) |
| Max. Weight: | 11.01 lb. |
